G Series - RSHLS 12/S 5,5

M12 Standard Sensor/Actuator Receptacle Connector: Male, rear mount with shielding clip, M12 - mating side, print contacts - connecting side, 12-pin, A-coded, shielded, metallic grey housing, 30 V AC/DC, 1.5 A

Availability:

Global
Status:

Active

Quote

Specifications
Part Numbers
Resources
Where to buy

Specifications

Expand All

Face View

Product Family	Sensor / Actuator Connectors
Side 1 Product Sub Family	M12 Standard
Mating Side	M12
Connecting Side	Print Contacts
Connector Type	Receptacle
Side 1 Type of Contact/Gender	Male
Connector Design	Rear Mount with Shielding Clip
Number of Pins	12
Coding, Side 1	A
Shielding Type	Shielded
Attachment Type	Screw-Locking
Voltage Rating	30 V
Rated Impulse Voltage	0.8 kV
Operating Voltage	30 V AC/DC
Current Rating	1.5 A
Contact Resistance	≤ 10 mOhm
Insulation Resistance	˃ 10^9 Ohm
Mating Cycles	≤ 100
Type of Connection	PCB
Thread Size	PG9
Thread Material	CuZn
Thread Plating	Nickel-plated
Ambient Temperature (Operation)*	- 25 °C - + 85 °C
Protection Degree / IP Rating**	IP65, IP67
Design Standard	In style of IEC 61076-2-101
Pollution Degree	3 acc. to DIN EN 60664-1 (VDE 0110-1)
Clearance / Creepage Distance	DIN EN 60664-1 (2008/01); VDE 0110-1
Overvoltage Category	III acc. to DIN EN 60664-1 (VDE 0110-1)

Materials

Contact Base Material	CuZn
Side 1 Contact Plating	Cu/Au
Contact Bearer Material	TPU-GF
Contact Bearer Color	Orange
Flammability Class (Contact Bearer)	UL 94 HB
Potted	Yes
Housing Material	CuZn
Housing Plating	Nickel-plated
Housing Color	Silver
Attachment Material	CuZn
Attachment Plating	Nickel-plated
Shielding Material	Shielding Clip: CuZn, Ag-plated
O-Ring Material	FKM

Circuitry

Fastening Torque (Attachment)	M 12x1: (50-60) Ncm, hand-tight

Safety & Environmental Compliance

RoHS Compliant	yes

Notes

Note Derating	* Notice derating
Protection Degree / IP Rating Note	* only if mounted and locked in combination with Hirschmann / Lumberg connector. On the installation side tightness has to be assured by taking proper measures.
Note	The receptacle connector is constructively intended for usage in IP67-products. To realise this protection class, the estimated location has to be designed accordingly. Further details see IEC 61076-2-101. Connection area must be epoxy potted.

Information

Note Derating	* Notice derating
Protection Degree / IP Rating Note	* only if mounted and locked in combination with Hirschmann / Lumberg connector. On the installation side tightness has to be assured by taking proper measures.
Note	The receptacle connector is constructively intended for usage in IP67-products. To realise this protection class, the estimated location has to be designed accordingly. Further details see IEC 61076-2-101. Connection area must be epoxy potted.