...
  • Hi-SCOM-Networking-Family

Hi-SCOM Industrial Networking Products

The Hi-SCOM networking product portfolio provides solutions that support a variety of networking applications such as networks for CCTV, ITS (intelligent transportation system) and building automation related applications. See below for a full list of solutions.

Hi-Scom Din Rail Switch

The BN44/BN48/BN49 Series industrial full Gigabit managed 6/10/16 ports Ethernet switch feature up to 4/8/12 × 10/100/1000 Mbps PoE (IEEE 802.3af/at) ports and 2/4 × 1000 Mbps SFP ports, 4 Mbits memory and support static layer 3 routing. A full Gigabit network provides higher throughput than legacy Fast Ethernet networks (10/100 Mbps). The BN44/BN48/BN49 series switches can provide power and data directly through Ethernet cable, ideal for CCTV, ITS (intelligent transportation systems) and building automation applications.

Key Features:

  • Strong Data Transmission and POE Performance: Full GIGA and POE/POE+ interface and ports. Maximum power consumption 30W per port.
  • Ensure reliability and stability of data transmission: -40 to 75 degree Celsius extended operating temperature. Redundancy power supply unit.
  • Easily configure and manage complex networks with intuitive provisioning software.

Download Product Bulletin


The BN3049 Series industrial full Gigabit managed 26-port Ethernet Switch features up to 24 × 10/100/1000 Mbps PoE (IEEE 802.3af/at) ports (including 4 shared SFP ports) and 2 × 1000 Mbps SFP ports, 4 Mbits memory and support static layer 3 routing. With a total switch fabric of 58 Gbps, the BN3049 can handle large amounts of data linking to an industrial backbone or high capacity servers, and has capability of providing wire-speed throughput in the temperature range from -40 up to 75 degrees C without any packet loss and CRC error. It greatly simplifies the task of upgrading the industrial network for catering to increasing bandwidth demands.

Key Features:

  • Strong data transmission and POE performance: Full GIGA and POE/POE+ interface and ports. Maximum power consumption 30W per port.
  • Ensure reliability and stability of data transmission: -40 to 75 degrees Celsius extended operating temperature. Redundancy power supply unit.
  • Easily configure and manage complex networks with intuitive provisioning software.

Download Product Bulletin

Hi-SCOM industrial PSUs feature high efficiency and extremely low no-load power consumption. Units are designed with a full metal shell for improved load capacity without a fan. In the presence of natural air circulation, the series can work stably and reliably in a wide range of temperatures. Hi-SCOM PSUs feature an overload protection function under constant current mode and are suitable for various inductive or capacitive load applications. Comprehensive protection functions and related certification of process control device makes this a competitive and robust industrial PSU.

Key Features:

  • Full range of AC input meets general international standard
  • Comprehensive protection function: Short-circuit/over-load/over-voltage/over-heated
  • Fanless design
  • DIN-rail mounting: Can be be installed in DIN rail TS-35/7.5/15
  • Features PFC function (240W)
  • 100% full-load aging

Download Product Bulletin

The Hi-SCOM IP66 PoE series industrial Ethernet switch is rated IP66 for reliable performance in environments exposed to dust and water. The series switch also supports IEEE802.3af and IEEE802.3at standards and can provide up to 30W output power on a single port, which can deliver power to PD devices such as IP cameras or wireless APs. PoE technology reduces the complexity and cost of network cabling, which offers convenience in situations where installing a PSU is a challenge. The Hi-SCOM IP66 PoE switch can be used in various industrial applications, including smart traffic systems, safe city systems and industrial automation.

Key Features:

High strength metal housing, IP66 rating
Uses M23 aviation interface as the Ethernet interface, with waterproof and dust-proof feature
Supports IEEE802.3af and IEEE802.3at standard, with up to 30W output power on each port
Supports multiple redundancy technologies, including G.8032 ERPS protocol and IEC62439-2 MRP protocol
Supports enhanced security features such as IP Source Guard, ARP Inspection, RADIUS, TACACS+
Supports routing function and support IPv4/IPv6 static route
Supports multiple networking functions such as IEEE802.1Q VLAN, QoS, IGMP Snooping, Loop protection, sFlow
Fanless design engineered for operating temperature range of -40 to +75 degrees C

Download Product Bulletin

 

 

The Hi-SCOM terminal server is a high-performance, low power consumption, small-sized, economical device server. The device can be managed and configured via Web/Telnet/Console controlling platform, which makes operation and maintenance easy. Using the Hi-SCOM terminal server, users can conveniently control their devices with serial interfaces such as RS-232/RS-422/RS-485 via Ethernet at any place. It also offers network firmware updates to ensure continuous improvement of product reliability and capabilities.

Key Features:

32bit high performance processor
All serial interfaces have internal 15KV ESD protection
Transmission reliability
WIN system COM serial port driver supports configuring virtual serial port offline
General Socket operating mode, TCP Server/Client and UDP mode
Auto-reconnection function
Serial port, TCP/UDP and system status online monitoring

Download Product Bulletin

 

All Hi-SCOM 100Mbps and 1000Mbps SFPs use LC fiber ports and support full duplex mode communication. They are compatible with the IEEE802.3ba standard and support various transmission distances. They support the digital diagnostic monitoring (DDM) function, which can help monitor the working status of SPFs in real time. Hi-SCOM SFPs can be deployed in harsh industrial environments, and their operating temperature is -40 to +75 degrees CHi-SCOM SFPs feature low power consumption in a compact size and are hot-swappable. The SFPs can be used in various applications, such as Ethernet/SDH/SONET/FB transmission.

Key Features:

  • Supports 100Mbps/1000Mbps data transmission rate
  • Dual LC interface
  • Transmission distance can reach up to 20 km on 9/125 µm single-mode optical fiber
  • Compliant with SFP MSA, RoHS standard and EN60825-1 standard

Data Sheets:

HS-FSFP-MM LC
HS-GSFP-SX LC
HS-GSFP-LX LC
HS-GSFP-LXLC-40
HS-GSFP-LXLC-80